DC 6-40V Battery Charger Discharger Board Integrated Voltmeter Undervoltage Overvoltage Protection Module Timing Charging Discharging Communication Function
Garanteret sikker betaling

Gratis Gave
Velkommen til Roymall, din professionelle hjemmeside til køb af premium stormagasinsgaver. Vi værdsætter og sætter pris på din support, og vi vil gerne vise vores taknemmelighed ved at tilføje en ekstra glæde til dine køb. Når du shopper hos os, får du ikke kun høj kvalitetsprodukter der forbedrer din livsstil, men du vil også modtage en eksklusiv gratis gave med hver ordre du placerer. Klar til at udforske vores samling og finde dine perfekte gaver? Gennemse vores udvalg af premium stormagasinsvarer, placer din ordre, og se frem til glæden ved at modtage din gratis gave sammen med dit køb.Forsendelsespolitik
Vi vil arbejde hårdt for at levere varer til dig efter modtagelse af dine ordrer og sikre at de ankommer sikkert. Forsendelsesdetaljer vil blive givet i din bekræftelsesemail.I de fleste tilfælde behandles ordrer inden for 2 dage.Under særlige omstændigheder vil det blive forsinket som følger: Når du placerer en ordre på lørdag, søndag eller helligdage, vil det blive forsinket med 2 dage.Normalt tager det 5-7 arbejdsdage (mandag til fredag) uden at blive påvirket af flyforsinkelser eller andre miljøfaktorer.Fordi vores forsendelsesservice er verdensomspændende, vil leveringstiderne afhænge af din placering, så det kan tage lidt tid og vær venlig at vente tålmodigt hvis du er i fjerntliggende distrikter eller lande.1. Returnering & Ombytning Politik
Vi accepterer kun varer købt fra roymall.com. Hvis du køber fra vores lokale distributører eller andre forhandlere, kan du ikke returnere dem hos os. Endelige salgsvarer eller gratis gaver accepteres ikke til returnering.For at være berettiget til en returnering, skal din vare være ubrugt og i samme stand som da du modtog den. Den skal også være i den originale emballage.Efter at have modtaget returneringsinstruktioner fra os, skal du pakke dine returnerede varer og aflevere din pakke på det lokale postkontor eller en anden kurer.Vi vil behandle din returnerede eller ombyttede vare inden for 3-5 arbejdsdage efter at vi modtager den. Refusionen vil blive behandlet og krediteret automatisk til din oprindelige betalingsmetode.Ingen returneringer eller ombytninger kan accepteres hvis produktet er produceret efter specialordre, herunder tilpasset størrelse, tilpasset farve eller tilpasset tryk.Har du brug for mere hjælp, kontakt os venligst. service@roymall.com eller Whatsapp: +86193598494712.Refusionspolitik
Du får en fuld refusion eller 100% butikskredit efter at vi har modtaget den returnerede pakke og tjekket den. Refusionen vil blive behandlet og krediteret automatisk til din oprindelige betalingsmetode.Bemærk venligst at forsendelsesomkostninger og eventuelle toldgebyrer eller afgifter ikke refunderes. De ekstra forsendelsesomkostninger refunderes ikke, når pakken er blevet sendt. Du er ansvarlig for at betale disse gebyrer, og vi kan ikke fravige eller refundere dem, selv hvis ordren returneres til os.Når vi har modtaget og bekræftet din returnerede vare, vil vi sende dig en email for at meddele dig, at vi har modtaget din returnerede vare. Vi vil også meddele dig godkendelsen eller afvisningen af din refusion.Hvis du har problemer med refusionsprocessen, kontakt os venligst. service@roymall.com eller Whatsapp: +8619359849471Specifications:
1: Power supply voltage: DC6--40V, voltage detection range DC 0--60V, suitable for less than 60V of the various batteries, voltage measurement error u00b1 0.1V.
2: charge and discharge time (OP) range: 0 - 999 minutes.
Features:
1. Battery charge and discharge intelligent control
2. You can set the charge and discharge time3. With serial communication function, real-time monitoring of the working status of the relay through the serial port
4. Additional signal output, when the relay to meet the conditions, the output high, you can control other equipment
5. A key emergency stop function (STOP button), with reverse protection, reverse does not burn
Operating mode:
Voltage upper limit: UL1, voltage lower limit nL1, the voltage upper limit is greater than the voltage lower limit (UL1> nL1)
U-1: Charging measurement: When the measured voltage is lower than the lower limit voltage, the relay pulls above; the upper limit voltage, the relay is disconnected.
U-2: Charge measurement time control: set the charging time (OP); when the measured voltage is lower than the lower limit voltage, the relay pull, and then start the countdown OP time, the end of the timer, the relay off; when the measured voltage is higher than the upper limit voltage , The relay is disconnected.
U-3: Discharge detection: When the measured voltage is lower than the lower limit voltage, the relay is off, above the upper limit voltage, the relay pulls.
U-4: Discharge detection time control: set the discharge time (OP); when the measured voltage is higher than the upper limit voltage, the relay pull, and then start the countdown OP time, the end of the timer, the relay off; when the measured voltage below the lower limit voltage , The relay is disconnected.
U-5: Voltage in the range, the relay pull: when the measured voltage between the upper and lower limits, the relay pull, the other circumstances open.
U-6: Voltage outside the interval, the relay pull: the measured voltage below the lower limit voltage or higher than the upper limit voltage, the relay pull, the other case the relay is off.
How to set parameters:
1. First, according to their needs, to determine the requirements of the work model;
2. According to the working mode of the relay, in the main interface (when the module is powered on, it will flash the current mode of operation, the default U-1 mode, and then enter the main interface) press the SET button for 2 seconds and then release, enter the selection Mode interface, UP, DOWN button to select the mode to be set (U-1 ~ U-6);
3. After selecting the mode, assume that we have selected the U-1 mode and press the SET button to set the corresponding parameter. The parameter to be set will flash (UL1 voltage upper limit, nL1 voltage lower limit, OP conduction time), press UP, DOWN Key to increase or decrease, you can always press the key to quickly increase or decrease, press the SET button to set the current mode of the next parameter, the process above;
4. Set the parameters, and then press the SET button for 2 seconds to release, the current setting mode will flash, and then return to the main interface, set the parameters of success!
5. In the main interface, press the DOWN key to achieve voltage and time switching.
Mode selection interface:
Press the SET button for a long time to enter the mode selection interface, set the finished, a long time press the SET button and then release the exit mode selection interface, back to the main interface.
Additional features:
1. Data upload: through the serial port to achieve data upload, interval 1s upload a voltage and run time, easy to post-data analysis;
2. Serial port settings parameters: You can set the mode and parameters through the serial port, more convenient;
3. An extra signal output, when the relay to meet the conditions, the output high, the other output low.
Serial port control (TTL level communication)
Communication standard:
The baud rate is 115200 bps
Data bits: 8
Stop bit: 1
Check digit: none
Flow control: none
Serial command:
"U-1": Operating mode (range U-1 to U-6)
"000": 0 - does not enable timing function, non-0 - enable timing function (range 001 to 999)
"Dw02.9": Set the lower limit voltage
"Up10.1": set the upper limit voltage (range 00.0V ~ 99.9V)
"Get": Get the current settings
"On": Allows the relay to turn on
"Off": Always turn off the relay
"Start": start uploading data
"Stop": stop uploading data
The above command can be any combination of two, need to be separated by commas
Such as: "dw02.9, up10.1" set the lower limit voltage 02.9V upper limit voltage 10.1V
Upload Status: Test Voltage + On Time + Status
"00.0V, 00: 00: 00, OP r n"
00.0V: Measured voltage
00:00:00: Relay on time
Status: OP relay on, CL relay off
STOP key function expansion:
Relay enable mode:
1. ON: OP conduction time, the relay allows conduction;
2. OFF: The relay is disabled and is always off;
Press the STOP button on the main interface to switch between ON and OFF, the current status will flash, and then return to the main interface. (This function is an emergency stop function, a key to disconnect the relay)
Sleep mode:
1. C-P sleep mode: within five minutes, without any operation, the digital tube automatically shut down the display, the program normal operation;
2. O-d normal mode: digital tube is always open display;
Press and hold the STOP button for 2 seconds to release, to achieve C-P and O-d state of the switch, the current state will flash, and then return to the main interface.
Package include:
1u00d7Battery Charger Discharger Board
0 Liked Tilføjet til kurv
- 3Pcs UNO R3 Sensor Shield V5 Expansion Board
- 199
- $3.50/ $10.970